CIOVFSEN=DISABLED, CIOVFDEN=DISABLED, XPHST=LOW, CPCAPEN=DISABLED, COUTST=LOW, YPHST=LOW, CIOVFIEN=DISABLED, CCSEN=DISABLED, CCDEN=DISABLED, ACTIVEPH=YACTIVE, CCIEN=DISABLED, CUPDCF=NOT_SET, CNCAPEN=DISABLED
Channel Capture/Compare Control
| COUTST | Channel Output State. 0 (LOW): The channel output state is low. 1 (HIGH): The channel output state is high. |
| CPCAPEN | Positive Edge Input Capture Enable. 0 (DISABLED): Disable positive-edge input capture. 1 (ENABLED): Enable positive-edge input capture. |
| CNCAPEN | Negative Edge Input Capture Enable. 0 (DISABLED): Disable negative-edge input capture. 1 (ENABLED): Enable negative-edge input capture. |
| CUPDCF | Channel Register Update Complete Flag. 0 (NOT_SET): A EPCA channel register update completed or is not pending. 1 (SET): A EPCA channel register update has not completed and is still pending. |
| YPHST | Differential Y Phase State. 0 (LOW): Set the Y Phase output state to low. 1 (HIGH): Set the Y Phase output state to high. |
| ACTIVEPH | Active Channel Select. 0 (YACTIVE): The Y Phase is active and X Phase is inactive. 1 (XACTIVE): The X Phase is active and Y Phase is inactive. |
| XPHST | Differential X Phase State. 0 (LOW): Set the X Phase output state to low. 1 (HIGH): Set the X Phase output state to high. |
| CCIEN | Capture/Compare Interrupt Enable. 0 (DISABLED): Disable the channel capture/compare interrupt. 1 (ENABLED): Enable the channel capture/compare interrupt. |
| CCDEN | Capture/Compare DMA Request Enable. 0 (DISABLED): Do not request DMA data when a channel capture/compare event occurs. 1 (ENABLED): Request DMA data when a channel capture/compare event occurs. |
| CCSEN | Capture/Compare Synchronization Signal Enable. 0 (DISABLED): Do not send a synchronization signal when a channel capture/compare event occurs. 1 (ENABLED): Send a synchronization signal when a channel capture/compare event occurs. |
| CIOVFIEN | Intermediate Overflow Interrupt Enable. 0 (DISABLED): Disable the channel intermediate overflow interrupt. 1 (ENABLED): Enable the channel intermediate overflow interrupt. |
| CIOVFDEN | Intermediate Overflow DMA Request Enable. 0 (DISABLED): Do not request DMA data when a channel intermediate overflow event occurs. 1 (ENABLED): Request DMA data when a channel intermediate overflow event occurs. |
| CIOVFSEN | Intermediate Overflow Synchronization Signal Enable. 0 (DISABLED): Do not send a synchronization signal when a channel intermediate overflow event occurs. 1 (ENABLED): Send a synchronization signal when a channel intermediate overflow occurs. |